topic Re: Blade System Module in BladeSystem - General

Blade System Module

Mark69 — Thu, 19 Jan 2017 08:46:03 GMT

I have a Blade system C7000 with 2 HP VC Flex-10 Enet Modules installed and I also need to install the same set up but with copper connections.

Any Ideas what Card I will need to do this?

Any advice much appreciated

Re: Blade System Module

Mark69 — Mon, 23 Jan 2017 10:13:33 GMT

Will a HP 1/10Gb Virtual Connect Ethernet Module for c-Class BladeSystem allow me standard cable connections to the blade system?

Re: Blade System Module

Albert3009 — Tue, 24 Jan 2017 09:19:35 GMT

Hi,

assuming, you talk about "HPE Virtual Connect Flex-10/10D Module", you can use "HP BladeSystem c-Class Virtual Connect 1G SFP RJ-45 Transceiver 453154-B21" for 1G uplinks

/br

Albert

Re: Blade System Module

Mark69 — Wed, 25 Jan 2017 11:15:21 GMT

I need to connect the blade system to a firewall using RJ45 so I'm guessing the a HP 1/10Gb Virtual Connect Ethernet Module for c-Class BladeSystem will do the job and then if I need any more RJ45 connections I can use the other ports on the module ?

Re: Blade System Module

Mark69 — Mon, 30 Jan 2017 09:13:08 GMT

Can I use a HP 1/10Gb Virtual Connect Ethernet Module - expansion module - 8 ports to connect the bladesystem to a switch or firewall with RJ45 connections?

Thaks for the advice.

Re: Blade System Module

Mark69 — Tue, 31 Jan 2017 11:17:30 GMT

Can I use the HP 1/10Gb Virtual Connect Ethernet Module - expansion module - 8 port just to give my blade system another 8 RJ45 connections to a LAN?

I don't want to purchase the wrong module so any advice would be much appreciated.

Thanks

Re: Blade System Module

peyrache — Tue, 31 Jan 2017 12:56:34 GMT

hello

shall you HPE reference (product number)

also a litle picture of what you want to do

thanks