topic Set device power sequence from CLI for c7000 in BladeSystem - General

Set device power sequence from CLI for c7000

ginigangadharan — Wed, 22 Apr 2015 05:09:52 GMT

Hi Team,

Anyone please advice the commands for setting device power sequence for blades from OA CLI ?

We are using ssh/CLI and prefer to do it from CLI instead of GUI which will take long time to set this one be one.

Enclosure : BladeSystem c7000 Enclosure G2

Thanks in advance.

Re: Set device power sequence from CLI for c7000

FB-1 — Wed, 22 Apr 2015 16:39:47 GMT

This is from the CLI user guide http://h20566.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=1844065&docId=emr_na-c00702815&docLocale=en_US

SET SERVER POWERDELAY {ALL | <bay number> [{ - | , } <bay number>]} {number

of seconds to delay power | NOPOWERON}

• Description: Set the PowerDelay status for the specified server or range of servers. If the delay is zero, the delay has

no effect on the device. If the delay is NOPOWERON, the device cannot poweron until all devices have

completed their delays.

• Access level/Bay level: Administrator

Bay specific

Re: Set device power sequence from CLI for c7000

mich_a — Tue, 28 Apr 2015 07:25:13 GMT

Dear ginigangadharan,

In addition to previous response you may leverage HP scripting tools for powershell for such configuration tasks.

With powershell you may automate configuration tasks as well as collect management information for HP servers.

Relevant commands for the device power sequense are the below:

Get-HPOAServerPowerDelay : Gets the PowerDelay status for the specified server blade or range of server blades.

Set-HPOAPowerDelay : Set the PowerDelay status for the specified server or range of servers or for specified interconnect or range of interconnects.

Related documenation:

http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c04271546

Regards

Re: Set device power sequence from CLI for c7000

ginigangadharan — Tue, 28 Apr 2015 08:00:51 GMT

Thanks a lot FB-1 , really appreciated.

Re: Set device power sequence from CLI for c7000

ginigangadharan — Tue, 28 Apr 2015 08:01:42 GMT

Thanks mich_a, really helpful one. Appreciated.

Re: Set device power sequence from CLI for c7000

evPlasma32 — Tue, 29 Nov 2022 20:38:38 GMT

We are still running c7000 Chassis- By enabling the power sequence and Apply the change will this cause any type of reboot for the devices installed so changes will take effect ?

Re: Set device power sequence from CLI for c7000

Sunitha_Mod — Thu, 01 Dec 2022 06:54:50 GMT

Hello @evPlasma32,

Thank you for writing to us. Since you have posted in an old topic and there is no response yet, I would recommend you to create a new topic using the create "New Discussion" button, so the experts can check and assist you further.