Valid c3000 configurations

SophieN — Mon, 20 Jul 2015 20:55:05 GMT

Bjarne had a question about valid c3000 configurations.

*******************

Hi There

I am trying to configure a C3000 with 5 * BL460 with 1 * 2*10 G FlexLOMs and 2 * 6120 XG switches . When I add the second 6120 XG switch SBW recommends to add a Mezzanine card to the Blade. Isnt this a valid configuration ?

Best Regards

Bjarne

*******************

Don answered:

*******************

Bjarne,

The reason is the wiring of the C3000 enclosure. Both Ports on the Flex LOM are routed to Slot 1 on the enclosure. When you add the second 6120 Switch, it will connect to Mezzanine 1 and will require a NIC.

Don

topic Valid c3000 configurations in BladeSystem - General

Valid c3000 configurations