https://community.hpe.com/t5/bladesystem-general/changing-c7000-enclosure-g2-power-redundancy-mode/m-p/6157327#M20650 To Clarify, you need to check the Power Allocation screen. If your allocation is less than 3 supplies can provide, then it is safe to switch the mode online. Sat, 03 Aug 2013 03:36:42 GMT Casper42 2013-08-03T03:36:42Z https://community.hpe.com/t5/bladesystem-general/changing-c7000-enclosure-g2-power-redundancy-mode/m-p/6154535#M20648 <P>Is there any impact to running blade servers when the Onboard Administrator changes the Power Redundancy Mode from Power Supply Redundant to AC Redundant.</P><P>&nbsp;</P><P>I have 6 available power supplies in the enclosure, but want to make sure changing the configuration won't have any impact on the running blade servers.</P><P>&nbsp;</P><P>Any advice would be appreciated. Thanks</P> Wed, 31 Jul 2013 15:14:19 GMT https://community.hpe.com/t5/bladesystem-general/changing-c7000-enclosure-g2-power-redundancy-mode/m-p/6154535#M20648 DaveH_UK 2013-07-31T15:14:19Z https://community.hpe.com/t5/bladesystem-general/changing-c7000-enclosure-g2-power-redundancy-mode/m-p/6154827#M20649 <P>If 3 power supplies are enough for your enclosure, you can switch mode online.</P> Wed, 31 Jul 2013 18:08:56 GMT https://community.hpe.com/t5/bladesystem-general/changing-c7000-enclosure-g2-power-redundancy-mode/m-p/6154827#M20649 Ing-Syst 2013-07-31T18:08:56Z https://community.hpe.com/t5/bladesystem-general/changing-c7000-enclosure-g2-power-redundancy-mode/m-p/6157327#M20650 To Clarify, you need to check the Power Allocation screen. If your allocation is less than 3 supplies can provide, then it is safe to switch the mode online. Sat, 03 Aug 2013 03:36:42 GMT https://community.hpe.com/t5/bladesystem-general/changing-c7000-enclosure-g2-power-redundancy-mode/m-p/6157327#M20650 Casper42 2013-08-03T03:36:42Z