c7000 AC to DC Power Conversion question.

chuckk281 — Thu, 27 Sep 2012 14:29:08 GMT

Hilton had a customer power question:

***************

Just wanted to confirm that converting a c7000 from AC to DC is as simple as converting from single phase to 3 phase, i.e. no funnies

1 ) Change out the power module ( 544661-001 or 544661-002 )

2 ) Change out the power supplies ( AH332A )

3 ) Set PDU type to DC in the OA CLI

**************

Reply from John in the Telco team:

************

Change the Power Input Module to DC (AH331A), swap power supplies (AH332A).

You will need a 80 amp @-48VDC feed (two lug) for each power supply, you will also need a chassis ground to match local code requirements.

When finished it should look like this.

The ISS Telco team can help you with this, as required.

****************

Comments or questions?

topic c7000 AC to DC Power Conversion question. in BladeSystem - General