https://community.hpe.com/t5/bladesystem-general/c7000-chassis-threshold-settings/m-p/2377133#M20809 <P><STRONG><FONT color="#000000">Jenny had a customer question on the c7000:</FONT></STRONG></P><P>&nbsp;</P><P>************************</P><P>&nbsp;</P><P>&nbsp;</P><P><SPAN>On the C7000 chassis can the</SPAN> <SPAN>thresholds be adjusted for monitoring alerts,</SPAN> <SPAN>i.e. setting the warning temp lower?&nbsp;&nbsp; Our facilities is setting up monitoring of the chassis via a custom Telnet script and want to test out the data they</SPAN> <SPAN>receive.&nbsp; I haven’t been able to find a</SPAN> <SPAN>way to set it, so I’m wondering if it something that could be hard set and can’t be change?</SPAN></P><P><SPAN>&nbsp;</SPAN></P><P><SPAN>********************</SPAN></P><P><SPAN>&nbsp;</SPAN></P><P><SPAN><STRONG><FONT color="#000000">Monty replied:</FONT></STRONG></SPAN></P><P><SPAN>&nbsp;</SPAN></P><P><SPAN>*******************</SPAN></P><P><SPAN>&nbsp;</SPAN></P><P>The thresholds are set on each device and cannot be changed.</P><P>&nbsp;</P><P>You could use a heat source, (very carefully) in front of the enclosure to test server thermal thresholds and the Onboard Administrator response.</P><P>&nbsp;</P><P>****************</P><P>&nbsp;</P><P><STRONG><FONT color="#000000">Comments or suggestions for Jenny?</FONT></STRONG></P> Fri, 29 Apr 2011 19:47:47 GMT chuckk281 2011-04-29T19:47:47Z https://community.hpe.com/t5/bladesystem-general/c7000-chassis-threshold-settings/m-p/2377133#M20809 <P><STRONG><FONT color="#000000">Jenny had a customer question on the c7000:</FONT></STRONG></P><P>&nbsp;</P><P>************************</P><P>&nbsp;</P><P>&nbsp;</P><P><SPAN>On the C7000 chassis can the</SPAN> <SPAN>thresholds be adjusted for monitoring alerts,</SPAN> <SPAN>i.e. setting the warning temp lower?&nbsp;&nbsp; Our facilities is setting up monitoring of the chassis via a custom Telnet script and want to test out the data they</SPAN> <SPAN>receive.&nbsp; I haven’t been able to find a</SPAN> <SPAN>way to set it, so I’m wondering if it something that could be hard set and can’t be change?</SPAN></P><P><SPAN>&nbsp;</SPAN></P><P><SPAN>********************</SPAN></P><P><SPAN>&nbsp;</SPAN></P><P><SPAN><STRONG><FONT color="#000000">Monty replied:</FONT></STRONG></SPAN></P><P><SPAN>&nbsp;</SPAN></P><P><SPAN>*******************</SPAN></P><P><SPAN>&nbsp;</SPAN></P><P>The thresholds are set on each device and cannot be changed.</P><P>&nbsp;</P><P>You could use a heat source, (very carefully) in front of the enclosure to test server thermal thresholds and the Onboard Administrator response.</P><P>&nbsp;</P><P>****************</P><P>&nbsp;</P><P><STRONG><FONT color="#000000">Comments or suggestions for Jenny?</FONT></STRONG></P> Fri, 29 Apr 2011 19:47:47 GMT https://community.hpe.com/t5/bladesystem-general/c7000-chassis-threshold-settings/m-p/2377133#M20809 chuckk281 2011-04-29T19:47:47Z