topic Re: Connecting to blade problem in BladeSystem - General

Connecting to blade problem

AGalkin — Fri, 20 Oct 2017 16:26:17 GMT

When i trying to connect a blade using KVM I get this error.

"Could not Connect Error (0x5) Wait a few seconds and try again"

I have incorrect static IP address in iLO settings (0.0.0.0), how can i reset it to DHCP??? I also try change position junpers (clear nvram..) on blade but it didn't help me.

Command "reset server <bay>" also didn't solve the problem.

Command "connect server <bay>" I get error "Invalid MP IP Address: 0.0.0.0".

BladeSystem c7000.

Re: Connecting to blade problem

peyrache — Fri, 20 Oct 2017 16:31:25 GMT

F8 during powerup to access ilo parameters
JY

Re: Connecting to blade problem

AGalkin — Fri, 20 Oct 2017 16:37:50 GMT

"When i trying to connect a blade using KVM I get this error.

"Could not Connect Error (0x5) Wait a few seconds and try again""

Re: Connecting to blade problem

msh_it — Sun, 19 Nov 2017 07:52:17 GMT

Using the adapter shipped with the blade enclosure, you can connect a screen and keyboard directly to the server. then use F8 to reset iLO IP