topic Re: Some basics questions about HP C7000 in BladeSystem - General

Some basics questions about HP C7000

zeeshannetwork — Tue, 21 Aug 2018 01:51:33 GMT

Hi everyone,

I am pretty new to Virtualization technology on HP C70000, I have some basics questions:

1) Normally, on hp server running EXSi,we can define standard vswitch, where we can map more than one physical ports on the box to Vswitch to allow redundancy. Does HP C7000 supports that i.e can I define standard Vsw, and map two physical ports on the box to Vswitch for redundancy ?

Apprecaited !!

Re: Some basics questions about HP C7000

slavtechbuer — Tue, 21 Aug 2018 11:30:05 GMT

Hi Mate,

I think you need to buy VC module to do that, but not 100% sure.

Kind Regards

Slav

Re: Some basics questions about HP C7000

Srinath_Raju — Tue, 28 Aug 2018 05:58:23 GMT

Hi,

The configuration you have mentioned is supported. vCenter supports both Standard switch and DB Switch. It has to be done by the ESXi & network administrator. The details are available in the following link.

http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c00698286-13.pdf

https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-c03275586&docLocale=en_US

Regards
Srinath Raju