https://community.hpe.com/t5/bladesystem-general/smart-array-fw-update/m-p/7085410#M22117 <P>Hi</P><P>HPE ProLient Gen6 onward servers, you can use HPE SPP (HPE Service Pack for ProLiant) to update Smart Array controller firmware.</P><P>Initiating SPP offline deployment:</P><P>1. Download latest SPP depending on your server model from below link.</P><P><A href="https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx" target="_blank">https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx</A></P><P>2. Copy the SPP to local machine from where target server iLO accessible.</P><P>3. Mount SPP iso to iLO virtual media.</P><P>4. Boot the server with SPP iso, so it launches the operating system on the SPP ISO.</P><P>5. It will prompt select mode (automatic / interactive) to deploy SPP.</P><P>6. Select interactive mode for selective component firmware upgrade and follow the instructions on the screen.</P><P>7. Once the firmware deployment complete, reboot the server and make sure SPP ISO unmount from iLO virtual media.</P> Mon, 20 Apr 2020 11:55:18 GMT AmRa 2020-04-20T11:55:18Z https://community.hpe.com/t5/bladesystem-general/smart-array-fw-update/m-p/7085298#M22110 Hi All<BR />I want update smart array firmware on hp blade on enclosure c7000 running solaris 10 on it. Kindly guide me complete procedure to update.<BR />Thanks Sat, 18 Apr 2020 23:24:35 GMT https://community.hpe.com/t5/bladesystem-general/smart-array-fw-update/m-p/7085298#M22110 A_basit 2020-04-18T23:24:35Z https://community.hpe.com/t5/bladesystem-general/smart-array-fw-update/m-p/7085410#M22117 <P>Hi</P><P>HPE ProLient Gen6 onward servers, you can use HPE SPP (HPE Service Pack for ProLiant) to update Smart Array controller firmware.</P><P>Initiating SPP offline deployment:</P><P>1. Download latest SPP depending on your server model from below link.</P><P><A href="https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx" target="_blank">https://techlibrary.hpe.com/us/en/enterprise/servers/products/service_pack/spp/index.aspx</A></P><P>2. Copy the SPP to local machine from where target server iLO accessible.</P><P>3. Mount SPP iso to iLO virtual media.</P><P>4. Boot the server with SPP iso, so it launches the operating system on the SPP ISO.</P><P>5. It will prompt select mode (automatic / interactive) to deploy SPP.</P><P>6. Select interactive mode for selective component firmware upgrade and follow the instructions on the screen.</P><P>7. Once the firmware deployment complete, reboot the server and make sure SPP ISO unmount from iLO virtual media.</P> Mon, 20 Apr 2020 11:55:18 GMT https://community.hpe.com/t5/bladesystem-general/smart-array-fw-update/m-p/7085410#M22117 AmRa 2020-04-20T11:55:18Z