https://community.hpe.com/t5/bladesystem-general/bl460c-wake-on-lan-problem/m-p/4155975#M2230 I have 6 BL460c G1's each fitted with an additional mezzanine NIC running VMware ESX. On 5 of the blades (spread across 2 blade enclosures) both the embeded and additional nic ports show as wake-on-lan enabled. On one of the blades only 2 of the nics are WOL. Do I have to turn on WOL in firmware to enable the other 2 ports? Or is this a known problem.<BR /><BR />All the blades are running firmware dated 01/24/2008 Wed, 05 Mar 2008 15:26:31 GMT A Shine 2008-03-05T15:26:31Z https://community.hpe.com/t5/bladesystem-general/bl460c-wake-on-lan-problem/m-p/4155975#M2230 I have 6 BL460c G1's each fitted with an additional mezzanine NIC running VMware ESX. On 5 of the blades (spread across 2 blade enclosures) both the embeded and additional nic ports show as wake-on-lan enabled. On one of the blades only 2 of the nics are WOL. Do I have to turn on WOL in firmware to enable the other 2 ports? Or is this a known problem.<BR /><BR />All the blades are running firmware dated 01/24/2008 Wed, 05 Mar 2008 15:26:31 GMT https://community.hpe.com/t5/bladesystem-general/bl460c-wake-on-lan-problem/m-p/4155975#M2230 A Shine 2008-03-05T15:26:31Z