topic Re: Blade system in BladeSystem - General

Blade system

itsme — Wed, 28 Feb 2007 20:18:56 GMT

We have just received a c7000 and 4 1/2 height blades. I have been searching at docs.hp.com for the 'must have' docs as we are all newbies with this hardware type. So far not very successful in finding all the right stuffs (HW setup, config, power, redundancy, etc..) . Can someone point me to the right direction, thanks in advance.

Re: Blade system

Marek Nelec — Thu, 01 Mar 2007 02:05:35 GMT

Try looking here:
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual〈=en&cc=us&docIndexId=179111&taskId=101&prodTypeId=329290&prodSeriesId=1844065

Re: Blade system

Magnus Bernhardson — Thu, 01 Mar 2007 03:45:06 GMT

Depending on what kind of blade you have purchased ,the first place to visit is the serverpages.
BL465C for example:
http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodSeriesId=2510357&prodTypeId=15351

There you will find all the drivers,firmware updates and documents you need.

Regards Magnus Bernhardson

Re: Blade system

itsme — Thu, 01 Mar 2007 11:53:04 GMT

Thank you both.