topic Re: Configuration for new blade replacement in BladeSystem - General

Configuration for new blade replacement

KKL — Sun, 04 Sep 2022 00:18:53 GMT

Dear All,

I will do replacing blade server old one (Gen08) to new one (Gen10) with exisiting enclosure. What I want to know is need to do reconfigure after new blade replacement. if yes, could you share what configuration are need to reconfigure and procedure detail?

As my understand need to do following configuration, is it correct?

1. iLO ip reconfiguration

2.. MAC address modification

3. server profile reassign

If there is any require configuration, please share.

Re: Configuration for new blade replacement

ManBha — Thu, 01 Sep 2022 08:54:03 GMT

Hello,

Yes, please install the blade and EBIPA can be used to assign IP to the bay.

Also, please do create a new profile for Gen10 server and assign it.

Thanks.

Re: Configuration for new blade replacement

KKL — Mon, 05 Sep 2022 07:42:35 GMT

@ManBha

Thanks for the response. Could you share the sample to add profile for gen10 blade and any reference document.

Re: Configuration for new blade replacement

ManBha — Mon, 05 Sep 2022 08:39:15 GMT

Hello,

Hope this helps.

https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00102211en_us [refer page 174 onwards]

Thanks.