topic Re: OA replacement procedure in BladeSystem - General

OA replacement procedure

Adarshop — Tue, 11 Apr 2023 02:01:06 GMT

Hi Team,

We have facing an issue in c7000 enclosure ,

Onboard administrator (OA) is continously rebooting, while we try to login VCM or ILO and collecting some logs something will do , OA is automatically rebooting, some times is not coming up the OA, and after that we needto reset the OA and poser supply then only it come up.

could you please help on this above case

we already ready for replacing the OA, Also could you please share the troubleshooting steps after OA replacement.

what are the prerequisition need to take before replacement the OA (onboard administrator)

Re: OA replacement procedure

MV3 — Mon, 10 Apr 2023 05:48:49 GMT

Hello,

First take a full backup of the OA. Refer to the below link for backup the OA config.

https://support.hpe.com/hpesc/public/docDisplay?docId=c02843807

Second, Check if the problematic OA is primary. if yes, Do a soft failover of the standy OA.

If the problematic OA is not primary, refer to the below link to replace the spare and check if the FW version is a match with the other OA.

https://support.hpe.com/hpesc/public/videoDisplay?videoId=vpsg00000294en_us

If the OA firmware is match allow it to sync.

If the OA firmware is not a match, Upgarde or downgrade the firmware as per the other OA.

You can also raise a support case with HPE and the same can be replaced by a Onsite tech or perform the activity over a VR session if you have the replacement part handy.

Cheers....

Re: OA replacement procedure

Adarshop — Mon, 10 Apr 2023 07:52:10 GMT

Hi ,

Thanks for your valuable reponse and support

Re: OA replacement procedure

Sunitha_Mod — Tue, 25 Apr 2023 15:06:36 GMT

Hello @Adarshop,

That's awesome!

We are glad to know your concern has been addressed.