https://community.hpe.com/t5/bladesystem-general/sb40c-critical-error-help/m-p/6447352#M23245 <P>I am getting a "Power Control fault...state is CRITICAL" error message for a SB40c in one of our c7000 enclosures. The SB40c firmware recently was updated from 1.20 to 2.20. Any ideas on what the fix is for this?</P> Mon, 14 Apr 2014 14:31:45 GMT pmumbower 2014-04-14T14:31:45Z https://community.hpe.com/t5/bladesystem-general/sb40c-critical-error-help/m-p/6447352#M23245 <P>I am getting a "Power Control fault...state is CRITICAL" error message for a SB40c in one of our c7000 enclosures. The SB40c firmware recently was updated from 1.20 to 2.20. Any ideas on what the fix is for this?</P> Mon, 14 Apr 2014 14:31:45 GMT https://community.hpe.com/t5/bladesystem-general/sb40c-critical-error-help/m-p/6447352#M23245 pmumbower 2014-04-14T14:31:45Z