C7000 - USB hardlock virtualization

Nuno_Barros — Fri, 21 Sep 2012 09:23:56 GMT

Hi everyone,

I have vmware installed in one enclosure c7000 with 8 full-height blades. And i want to virtualize four servers that have usb hardlocks.

I recently, have tested a Sharkoon USB LANPORT 400, but doesn't work with hardlocks.

Someone know a method to virtualize this?

Thanks in advance.

Nuno

Re: C7000 - USB hardlock virtualization

Jags_21 — Thu, 27 Sep 2012 05:18:26 GMT

Hi,

Try connecting directly to the Host through blade front port dongle and follow the steps as per below article: which allows to configure USB passthrough, but it has limitations on these configuration which you can find in the article.

http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1022290

Check with the Sharkoon USB LANPORT 400 if it supports all the device types as there could some limitation in device support, another solution which vmware certified is USB Anywhere try checking on these.

Thanks,

Jagadish

-----------------
Was the post useful? Click on the white KUDOS! Star on the left side of this post.
For HP Guided Troubleshooting; http://www.hp.com/support/hpgt

topic C7000 - USB hardlock virtualization in BladeSystem - General

C7000 - USB hardlock virtualization

Re: C7000 - USB hardlock virtualization