https://community.hpe.com/t5/bladesystem-general/bl460c-crashing-when-loading-up-install-disk/m-p/6728485#M23625 <P>Check the iLO and server IML logs</P> Wed, 01 Apr 2015 18:42:00 GMT Jimmy Vance 2015-04-01T18:42:00Z https://community.hpe.com/t5/bladesystem-general/bl460c-crashing-when-loading-up-install-disk/m-p/6728481#M23624 <P>Hello,</P><P>&nbsp;</P><P>I have 4x BL460c Gen1. I am installing XenServer 6.5 and it succeeded in 3 of the blades. One of them keeps crashing when loading up the install disk. I've tried a new ISO, updated the firmware, and still crashing when loading up the installation environment.</P><P>&nbsp;</P><P>I ran HP diags and it says everything is fine and working good.&nbsp;</P><P>&nbsp;</P><P>If it was because Xenserver 6.5 is not compatible with this gen blades, i cant explain why it would work on all but 1.</P><P>&nbsp;</P><P>If there anything i can do to get more info about the crash? It just reboots and i cant find any logs or anything that would help me troubleshoot this.</P><P>&nbsp;</P><P>Thanks</P> Wed, 01 Apr 2015 18:32:33 GMT https://community.hpe.com/t5/bladesystem-general/bl460c-crashing-when-loading-up-install-disk/m-p/6728481#M23624 rventura 2015-04-01T18:32:33Z https://community.hpe.com/t5/bladesystem-general/bl460c-crashing-when-loading-up-install-disk/m-p/6728485#M23625 <P>Check the iLO and server IML logs</P> Wed, 01 Apr 2015 18:42:00 GMT https://community.hpe.com/t5/bladesystem-general/bl460c-crashing-when-loading-up-install-disk/m-p/6728485#M23625 Jimmy Vance 2015-04-01T18:42:00Z