BL460c Gen9 support for XENServer 6.5

chuckk281 — Wed, 06 May 2015 19:38:44 GMT

Massimo was looking for XenServer support for various adapters:

************

Hello colleagues

Our OS Support Matrix with XenServer 6.5 and Gen9 Server is still empty :

http://h18004.www1.hp.com/products/servers/software/citrix/hpcitrixcert.html

But the CitrixHCL, our Gen9 Servers are listed :

http://hcl.xensource.com/HCLHome.aspx

I know, our HP OS Support Matrix it will be updated soon, but which NIC/CNA will be supported with XenServer 6.5 ?

I need FlexFabric CNA LOM (10Gb or 20Gb) :

536FLB Broadcom Chipset 57840S

630FLB Broadcom BCM 57840S

650FLB Emulex XE-104

All the above CNA/NICs are not listed with XenServer 6.5 only with 6.2 and 6.2 will not be supported with BL460cGen9, my customer needs 6.5 support !

Any clue on this matter ?

***********

Reply from Jan:

************

Hello Massimo,

The BL460c Gen9 servers are supported with XenServer 6.5 already.

The link that you posted is old.

Use the following instead:

http://h17007.www1.hp.com/us/en/enterprise/servers/supportmatrix/xenserver.aspx#.VNIEqp1ARww

***********

Comments?

Re: BL460c Gen9 support for XENServer 6.5

blautens — Fri, 08 Jul 2016 03:56:01 GMT

FWIW, we've used XenServer 6.5 on BL460C Gen9 blades with 650FLB adapters successfully..

Thanks,

Bruce

topic BL460c Gen9 support for XENServer 6.5 in BladeSystem - General

BL460c Gen9 support for XENServer 6.5

Re: BL460c Gen9 support for XENServer 6.5