https://community.hpe.com/t5/bladesystem-general/gbe2c-switch-telnet-time-out/m-p/5399029#M23681 Hi After i configure tacacs+ for the switch . telneting into switch timeout real quick so we can not do anything. befoire i even finish typing my password. i tried changing the "idle" time under /c/sys/ but the time out resets back to the value 0 after i try logging back. for some reason it wont let me apply the changes. i have upgraded to a newer version thinking it might be a bug in the old version but it did not solve the issue. so far this is an on going issue with both version 5.1.3 and 5.2.7 switches. Any help is really appreciated Mary Wed, 23 Nov 2011 20:44:28 GMT mghabrai 2011-11-23T20:44:28Z https://community.hpe.com/t5/bladesystem-general/gbe2c-switch-telnet-time-out/m-p/5399029#M23681 Hi After i configure tacacs+ for the switch . telneting into switch timeout real quick so we can not do anything. befoire i even finish typing my password. i tried changing the "idle" time under /c/sys/ but the time out resets back to the value 0 after i try logging back. for some reason it wont let me apply the changes. i have upgraded to a newer version thinking it might be a bug in the old version but it did not solve the issue. so far this is an on going issue with both version 5.1.3 and 5.2.7 switches. Any help is really appreciated Mary Wed, 23 Nov 2011 20:44:28 GMT https://community.hpe.com/t5/bladesystem-general/gbe2c-switch-telnet-time-out/m-p/5399029#M23681 mghabrai 2011-11-23T20:44:28Z