https://community.hpe.com/t5/bladesystem-general/mapping-network-port-blade-system-c3000/m-p/5646115#M23720 <P>Dear All,</P><P>I have one BladeSystem C3000, and recently my network teaming stoped of work.</P><P>I´ll try change the port of mapping. For example: Before of trouble, I had Port 01(module 1) with interconection with POrt 1 (module</P><P>&nbsp;</P><P>Below my question:</P><P>&nbsp;</P><P>I need change the network Teaming to Port 12 (module 01) with interconection Port 12 (module2).</P><P>I would like to know if this is possible in Blade System C3000 and how to do?</P><P>Thank you very much.</P><P>&nbsp;</P> Thu, 03 May 2012 20:49:42 GMT Grande_bart 2012-05-03T20:49:42Z https://community.hpe.com/t5/bladesystem-general/mapping-network-port-blade-system-c3000/m-p/5646115#M23720 <P>Dear All,</P><P>I have one BladeSystem C3000, and recently my network teaming stoped of work.</P><P>I´ll try change the port of mapping. For example: Before of trouble, I had Port 01(module 1) with interconection with POrt 1 (module</P><P>&nbsp;</P><P>Below my question:</P><P>&nbsp;</P><P>I need change the network Teaming to Port 12 (module 01) with interconection Port 12 (module2).</P><P>I would like to know if this is possible in Blade System C3000 and how to do?</P><P>Thank you very much.</P><P>&nbsp;</P> Thu, 03 May 2012 20:49:42 GMT https://community.hpe.com/t5/bladesystem-general/mapping-network-port-blade-system-c3000/m-p/5646115#M23720 Grande_bart 2012-05-03T20:49:42Z