topic Re: Trouble accessing GbE2c Layer 2/3 Ethernet Blade Switch in BladeSystem - General

Trouble accessing GbE2c Layer 2/3 Ethernet Blade Switch

Jaycee098 — Mon, 20 Feb 2017 20:32:35 GMT

Today I tried to access our HP GbE2c Layer 2/3 Ethernet Blade Switch. The IP was not responding to a ping. I then attempted to access it via the console port and is displaying the following:

I2c: return timout

statusReg: 0x00000010

addrReg: 0x000000fe

controlReg: 0x00000080

freqReg: 0x00001029

Warning: Failed to read the ISMIC interupt reason info block!

I'm not finding any info about this from an online search. Does anyone have any information about the warning I'm receiving?

Thanks,

Jaycee

Re: Trouble accessing GbE2c Layer 2/3 Ethernet Blade Switch

harefsalomon — Thu, 23 May 2019 05:18:32 GMT

What is the solutions for this problem?????

Re: Trouble accessing GbE2c Layer 2/3 Ethernet Blade Switch

Siddhartha_M — Tue, 28 May 2019 09:35:46 GMT

Hello,

Would recommend the below in off production.

1. Reset the switch with the reset button/pin on the switch itself.

2. If not physically reseat the switch and check.

If issue still persist please log a support case to investigae further.

I am an HPE employee.

Thanks,