Question on iLO status codes

chuckk281 — Tue, 02 Dec 2014 15:57:21 GMT

Torsten was looking for iLO info:

************

ILO is showing status codes during early boot on console and on remote console also.

Is there any reference for these codes?

************

Radi has some info:

***********

There is. Basically this is the iLO port 84/85 codes displayed, which you can check in the Proliant troubleshooting guide and it is part of the system specification .

On gen9 though the specification was changed from previous generations.

In this instance 0114 is an early rom initialization reference code – try switching up to the redundant rom, reflash the BIOS …

If this is for Gen9 check if the health led is not blinking and reference it in the troubleshooting guide for Gen9 – Port 85 with 01 is indicative of a CPU issue.

***********

Reply from Torsten:

***********

Hi Radi,

thanks for your answer.

I did not read the guide for Gen9 so far, but now i take a look into it and it has likely more and better information as the previous versions.

Thanks!

**********

Comments?

topic Question on iLO status codes in BladeSystem - General

Question on iLO status codes