https://community.hpe.com/t5/bladesystem-general/hpsum-v7-1-error-when-creating-a-node/m-p/6683336#M24392 <P>I have succesfully updated one of our brand new C7000 Chassis using HPSUM however the second chassis, which is on the same network etc... will not do an inventory.</P><P>I have a baseline which I used when updating the first chassis.</P><P>I add the second chassis as Add node, enter IP address, select Onboard Administrator, select the baseline, and enter the OA logon credentials and then click Add.</P><P>I then run an inventory agaisnt the new node and it fails almost immediately with "inventory failed. check logs for more detailed information". Lo and behold the "logs" dont help - One is empty and the other says "Staring Inventory....Inventory Failed" and thats it !</P><P>Any ideas ? These are two brand new chassis, both configured exactly the same.&nbsp;</P><P>Rob</P> Wed, 10 Dec 2014 11:23:05 GMT RobCa 2014-12-10T11:23:05Z https://community.hpe.com/t5/bladesystem-general/hpsum-v7-1-error-when-creating-a-node/m-p/6683336#M24392 <P>I have succesfully updated one of our brand new C7000 Chassis using HPSUM however the second chassis, which is on the same network etc... will not do an inventory.</P><P>I have a baseline which I used when updating the first chassis.</P><P>I add the second chassis as Add node, enter IP address, select Onboard Administrator, select the baseline, and enter the OA logon credentials and then click Add.</P><P>I then run an inventory agaisnt the new node and it fails almost immediately with "inventory failed. check logs for more detailed information". Lo and behold the "logs" dont help - One is empty and the other says "Staring Inventory....Inventory Failed" and thats it !</P><P>Any ideas ? These are two brand new chassis, both configured exactly the same.&nbsp;</P><P>Rob</P> Wed, 10 Dec 2014 11:23:05 GMT https://community.hpe.com/t5/bladesystem-general/hpsum-v7-1-error-when-creating-a-node/m-p/6683336#M24392 RobCa 2014-12-10T11:23:05Z https://community.hpe.com/t5/bladesystem-general/hpsum-v7-1-error-when-creating-a-node/m-p/6683614#M24393 <P><SPAN>Are you logged in as Administrator?</SPAN></P><P>&nbsp;</P> Wed, 10 Dec 2014 22:42:05 GMT https://community.hpe.com/t5/bladesystem-general/hpsum-v7-1-error-when-creating-a-node/m-p/6683614#M24393 ZoranMil 2014-12-10T22:42:05Z