https://community.hpe.com/t5/bladesystem-general/hba-paths-getting-flapped-intermittently/m-p/7016043#M25157 <P>Hi Naveen,</P><P>Reading the description of the issue we see that the information shared is very minimum. This needs a thorough dianosis hence request you to log a case on our portal and submit a case using the below link:-</P><P><A href="https://support.hpe.com/hpesc/public/home" target="_blank">https://support.hpe.com/hpesc/public/home</A></P> Mon, 27 Aug 2018 06:02:17 GMT Bunsol 2018-08-27T06:02:17Z https://community.hpe.com/t5/bladesystem-general/hba-paths-getting-flapped-intermittently/m-p/7014397#M25156 <P><FONT color="#FF6600">Enivironemnt setup:- Using c-7000 chassiss and BL-660 GEN 9 blades,storage is HP 3PAR. VC is used.,Cluseter being build in VMware infra. 8 bays fll width baldes used.</FONT></P><P><FONT color="#FF0000">When starting the vmware cluseter we noticed that the storage Paths are flapping.</FONT></P><P>Tried to replace the HBA cards for few bays but still issue persists,tried to re-configure Virtual conenct including the server profile. Still not fixing the issues.Tried to swap the HBAs between blades but still issues persists. Can anybody sujjest what needs to be done.</P><P>&nbsp;</P> Wed, 08 Aug 2018 12:02:31 GMT https://community.hpe.com/t5/bladesystem-general/hba-paths-getting-flapped-intermittently/m-p/7014397#M25156 NaveenDev 2018-08-08T12:02:31Z https://community.hpe.com/t5/bladesystem-general/hba-paths-getting-flapped-intermittently/m-p/7016043#M25157 <P>Hi Naveen,</P><P>Reading the description of the issue we see that the information shared is very minimum. This needs a thorough dianosis hence request you to log a case on our portal and submit a case using the below link:-</P><P><A href="https://support.hpe.com/hpesc/public/home" target="_blank">https://support.hpe.com/hpesc/public/home</A></P> Mon, 27 Aug 2018 06:02:17 GMT https://community.hpe.com/t5/bladesystem-general/hba-paths-getting-flapped-intermittently/m-p/7016043#M25157 Bunsol 2018-08-27T06:02:17Z