https://community.hpe.com/t5/bladesystem-general/smartupdate-manager-returns-self-inventory-error-for-component/m-p/7051435#M25320 <P>Trying to install SPP 2019.03.0/.1 when running smartupdate manager, it installs all firmware except for the FC firmware on QMH2672. It was not noticed as there is no error when installing SPP, but on troubleshooting another issue, it was discovered that in SUM_Execution log, it shows "<STRONG>Self inventory failed for component firmware-fc-qlogic-2019.03.01-1.11.x86_64.rpm</STRONG>" anyone come accross this error?</P><P>This issue has been seen on both RHEL6 and RHEL7 OS on BL460c Gen9</P> Thu, 20 Jun 2019 07:30:05 GMT AmitG0223 2019-06-20T07:30:05Z https://community.hpe.com/t5/bladesystem-general/smartupdate-manager-returns-self-inventory-error-for-component/m-p/7051435#M25320 <P>Trying to install SPP 2019.03.0/.1 when running smartupdate manager, it installs all firmware except for the FC firmware on QMH2672. It was not noticed as there is no error when installing SPP, but on troubleshooting another issue, it was discovered that in SUM_Execution log, it shows "<STRONG>Self inventory failed for component firmware-fc-qlogic-2019.03.01-1.11.x86_64.rpm</STRONG>" anyone come accross this error?</P><P>This issue has been seen on both RHEL6 and RHEL7 OS on BL460c Gen9</P> Thu, 20 Jun 2019 07:30:05 GMT https://community.hpe.com/t5/bladesystem-general/smartupdate-manager-returns-self-inventory-error-for-component/m-p/7051435#M25320 AmitG0223 2019-06-20T07:30:05Z https://community.hpe.com/t5/bladesystem-general/smartupdate-manager-returns-self-inventory-error-for-component/m-p/7051884#M25321 <P>I could not find similar issue on RHEL environment, however found for ESXi platform</P><P><A href="https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00069344en_us" target="_blank">https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00069344en_us</A></P><P>This was addressed in latest release of FW upgrade, I see as per error mentioned it is one version old "<STRONG>firmware-fc-qlogic-2019.03.01-1.11.x86_64.rpm" .&nbsp;</STRONG></P><P>I would advise to use below latest update as part of your repository and remove above previous version from repository.</P><P><SPAN>firmware-fc-qlogic-2019.03.02-1.1.x86_64.rpm&nbsp;</SPAN></P><P><SPAN>firmware-fc-qlogic-2019.03.02-1.1.x86_64.compsig</SPAN></P><P><A href="https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_04e9176cc1d84501aa9de679a0#tab1" target="_blank" rel="noopener">https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_04e9176cc1d84501aa9de679a0#tab1</A></P><P>If above does not help to resolve your issue. Please log a support case with HPE for further investigation.</P><P>&nbsp;</P><P>I am an HPE Employee!</P><P>&nbsp;</P> Mon, 24 Jun 2019 09:10:27 GMT https://community.hpe.com/t5/bladesystem-general/smartupdate-manager-returns-self-inventory-error-for-component/m-p/7051884#M25321 SB6 2019-06-24T09:10:27Z