https://community.hpe.com/t5/bladesystem-general/raid-controller-s100i-sr-gen10/m-p/7128904#M25547 <P style="margin: 0;">Hello,</P> <P style="margin: 0;">&nbsp;</P> <P style="margin: 0;">This is not possible.</P> <P style="margin: 0;">&nbsp;</P> <P style="margin: 0;">You have you same or higher capacity hard drive and but same technology hard disks.</P> Wed, 07 Apr 2021 07:51:33 GMT SanjeevGoyal 2021-04-07T07:51:33Z https://community.hpe.com/t5/bladesystem-general/raid-controller-s100i-sr-gen10/m-p/7128533#M25546 Hi,<BR /><BR />Currently i have 1 logical drive array with raid 1 configuration with 2 physical SATA HDD 1 TB each. I want to migrate from SATA HDD to SATA SSD. Can raid controller rebuild drive if i remove one 1 TB sata hdd and insert 1 TB sata ssd. And later once rebuild completes then i replace another sata hdd to sata ssd. This way i can migrate both physical drives to ssd instead of hdd.<BR />Regards,<BR />Piyush Luniya<BR />9772712345 Mon, 05 Apr 2021 06:55:24 GMT https://community.hpe.com/t5/bladesystem-general/raid-controller-s100i-sr-gen10/m-p/7128533#M25546 PiyushL 2021-04-05T06:55:24Z https://community.hpe.com/t5/bladesystem-general/raid-controller-s100i-sr-gen10/m-p/7128904#M25547 <P style="margin: 0;">Hello,</P> <P style="margin: 0;">&nbsp;</P> <P style="margin: 0;">This is not possible.</P> <P style="margin: 0;">&nbsp;</P> <P style="margin: 0;">You have you same or higher capacity hard drive and but same technology hard disks.</P> Wed, 07 Apr 2021 07:51:33 GMT https://community.hpe.com/t5/bladesystem-general/raid-controller-s100i-sr-gen10/m-p/7128904#M25547 SanjeevGoyal 2021-04-07T07:51:33Z