topic Re: BL460C G8 Mass Storage Controller Drivers Help in BladeSystem - General

BL460C G8 Mass Storage Controller Drivers Help

Garabed — Fri, 18 Mar 2022 00:47:33 GMT

I am showing two Mass Storage Controller Devices missing drivers in Device Manager and I cannot for the life of me find the drivers. I have went through one by one all the drivers on HP with no luck. If anyone can help I would appreciate it.

Device PCI\VEN_19A2&DEV_0712&SUBSYS_337B103C&REV_01\4&2263a140&0&0210 requires further installation.

Device PCI\VEN_19A2&DEV_0712&SUBSYS_337B103C&REV_01\4&2263a140&0&0310 requires further installation.

Re: BL460C G8 Mass Storage Controller Drivers Help

Ihaqueit — Fri, 11 Mar 2022 17:15:45 GMT

Hi try to download drivers from HPE website.

http://h20564.www2.hpe.com/hpsc/swd/public/readIndex?sp4ts.oid=5157197&swLangOid=8&swEnvOid=4038

choose the right operating system.

Re: BL460C G8 Mass Storage Controller Drivers Help

Garabed — Tue, 15 Mar 2022 14:23:08 GMT

I was not able to find a resolution.

Re: BL460C G8 Mass Storage Controller Drivers Help

Sham82 — Wed, 16 Mar 2022 02:53:18 GMT

Hi,

Looking at the - VEN_19A2&DEV_0712 , It seems like the device is "OneConnect 10Gb iSCSI Initiator (be3)"

Link for BL460c Gen8 Driver/Firmware :
https://support.hpe.com/connect/s/product?language=en_US&ismnp=0&l5oid=5177949&kmpmoid=5177951&tab=driversAndSoftware&cep=on

From the above link you will be able to find Drivers for only HPE Devices.

Also If you have ILo Configured.
please check for storage and Network Devices in ILO and download and install appropriate driver from the above link.

Regards.
HPE