https://community.hpe.com/t5/bladesystem-general/bl460c-class-and-windows-2000-advanced-server-sp4/m-p/922#M26251 Silly question, but is the e200 seated properly? I noted an advisory on a similar issue when the controller isn't identified at POST: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00805127&lang=en&cc=us&taskId=101&prodSeriesId=1842750&prodTypeId=15351 Scott Tue, 02 Sep 2008 23:39:00 GMT sgunelius 2008-09-02T23:39:00Z https://community.hpe.com/t5/bladesystem-general/bl460c-class-and-windows-2000-advanced-server-sp4/m-p/921#M26250 Hi All, I have a major issue with BL460c Class Quad Core and W2000 Advanced Server SP4, although it detects the Raid controller as "RAID" we apply the HP Driver (SS760) and it does not seem to detect it during reboot. The system is working fine and we have no errors in the Event Viewer, also we have an Emulex FC installed and it keeps "disabling" the second port. I am searching for W2000 Server support for E200i Smart Array but only a generic driver is available. Can someone help on this? THX. Sat, 17 May 2008 18:24:00 GMT https://community.hpe.com/t5/bladesystem-general/bl460c-class-and-windows-2000-advanced-server-sp4/m-p/921#M26250 Christos Simos 2008-05-17T18:24:00Z https://community.hpe.com/t5/bladesystem-general/bl460c-class-and-windows-2000-advanced-server-sp4/m-p/922#M26251 Silly question, but is the e200 seated properly? I noted an advisory on a similar issue when the controller isn't identified at POST: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00805127&lang=en&cc=us&taskId=101&prodSeriesId=1842750&prodTypeId=15351 Scott Tue, 02 Sep 2008 23:39:00 GMT https://community.hpe.com/t5/bladesystem-general/bl460c-class-and-windows-2000-advanced-server-sp4/m-p/922#M26251 sgunelius 2008-09-02T23:39:00Z