Looking for a script/command that allows me to create an iLO userid and a password on all of the blades in an enclosure

chuckk281 — Thu, 18 Feb 2010 14:22:10 GMT

Ron had an iLO scripting question:

Looking for a script/command that allows me to create an iLO userid and a password on all of the blades in an enclosure. Is this possible? Thanks.

Steve and Ken responded:

Yes, this very easy. Simply telnet to the OA and paste these commands in to the session.

Edit each command accordingly to add or change the appropriate user.

The first one changes the default administrator password

The second adds an account

The third applies the iLO advanced license.

Also, check the website for iLO scripts, there is a zip file with several example.

HPONCFG all << end_marker

<USER_INFO MODE="write">

<MOD_USER USER_LOGIN="Administrator">

</MOD_USER>

</USER_INFO>

</LOGIN>

</RIBCL>

end_marker

HPONCFG all << end_marker

<USER_INFO MODE="write">

<ADD_USER

USER_NAME="stevem"

USER_LOGIN="stevem"

PASSWORD="Compaq123">

<ADMIN_PRIV value ="Yes"/>

<REMOTE_CONS_PRIV value ="Yes"/>

<RESET_SERVER_PRIV value ="Yes"/>

<VIRTUAL_MEDIA_PRIV value ="Yes"/>

<CONFIG_ILO_PRIV value="Yes"/>

</ADD_USER>

</USER_INFO>

</LOGIN>

</RIBCL>

end_marker

#Note: you will need to change the Activate Key below to the one for your POD

HPONCFG all << end_marker

<RIB_INFO MODE="write">

</LICENSE>

</RIB_INFO>

</LOGIN>

</RIBCL>

end_marker

Regards, Steve....

*****************************************************************************************

Also the ILO license key needs to be entered into the script with the hyphens removed.

(That took a little head scratching to figure out.)

Ken

**************************************************************************************************

Good info and if you have any additions to the scripting let us know.

topic Looking for a script/command that allows me to create an iLO userid and a password on all of the blades in an enclosure in BladeSystem - General

Looking for a script/command that allows me to create an iLO userid and a password on all of the blades in an enclosure