https://community.hpe.com/t5/bladesystem-general/blinking-amber-led/m-p/4186552#M2652 I have checked the IML log and there was nothing unusual in it then I cleared it. The hard drive is fine, it's running the OS normally atm on all the blades with the blinking amber LED. Nobody knows what a blinking amber LED means? Mon, 28 Apr 2008 21:35:24 GMT swingarm 2008-04-28T21:35:24Z https://community.hpe.com/t5/bladesystem-general/blinking-amber-led/m-p/4186550#M2650 I have some BL460c G1's and about 3-6 of them have a blinking amber health LED. Onboard Admin says the health is ok and there's nothing unusual in the logs. They are running the OS(Linux) normally. Onboard Admin firmware is at 2.13 and the ILO2 firmware is at 1.50. I have looked high and low to see what this means but I can't find any answers. Thu, 24 Apr 2008 20:26:26 GMT https://community.hpe.com/t5/bladesystem-general/blinking-amber-led/m-p/4186550#M2650 swingarm 2008-04-24T20:26:26Z https://community.hpe.com/t5/bladesystem-general/blinking-amber-led/m-p/4186551#M2651 Check the IML log (and clear it). Have You checked the hard drives? Fri, 25 Apr 2008 04:34:48 GMT https://community.hpe.com/t5/bladesystem-general/blinking-amber-led/m-p/4186551#M2651 JKytsi 2008-04-25T04:34:48Z https://community.hpe.com/t5/bladesystem-general/blinking-amber-led/m-p/4186552#M2652 I have checked the IML log and there was nothing unusual in it then I cleared it. The hard drive is fine, it's running the OS normally atm on all the blades with the blinking amber LED. Nobody knows what a blinking amber LED means? Mon, 28 Apr 2008 21:35:24 GMT https://community.hpe.com/t5/bladesystem-general/blinking-amber-led/m-p/4186552#M2652 swingarm 2008-04-28T21:35:24Z