https://community.hpe.com/t5/bladesystem-general/microsoft-cluster-supported-with-two-different-generation/m-p/6679342#M26832 <P>That should be correct as long as the servers can both reach the shared storage and networks are also reachable and network config is the same you should have no problems.&nbsp;</P> Sat, 29 Nov 2014 22:29:13 GMT Andrew_Haak 2014-11-29T22:29:13Z https://community.hpe.com/t5/bladesystem-general/microsoft-cluster-supported-with-two-different-generation/m-p/6677824#M26831 <P><STRONG>Cluster question from Mohamed:</STRONG></P> <P>&nbsp;</P> <P>***********</P> <P>&nbsp;</P> <P>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Can we build MS Cluster with two Blade Servers different generation “G7 and G8 “? Is this supported from Microsoft ?</P> <P>&nbsp;</P> <P>&nbsp;</P> <P>***********</P> <P>&nbsp;</P> <P><STRONG>Reply from Frank</STRONG>:</P> <P>&nbsp;</P> <P>*************</P> <P>&nbsp;</P> <P>The only requirement from Microsoft for support is that the cluster pass the configuration validation wizard.</P> <P>&nbsp;</P> <P>*************</P> <P>&nbsp;</P> <P><STRONG>Comments?</STRONG></P> <P>&nbsp;</P> Tue, 25 Nov 2014 18:53:16 GMT https://community.hpe.com/t5/bladesystem-general/microsoft-cluster-supported-with-two-different-generation/m-p/6677824#M26831 chuckk281 2014-11-25T18:53:16Z https://community.hpe.com/t5/bladesystem-general/microsoft-cluster-supported-with-two-different-generation/m-p/6679342#M26832 <P>That should be correct as long as the servers can both reach the shared storage and networks are also reachable and network config is the same you should have no problems.&nbsp;</P> Sat, 29 Nov 2014 22:29:13 GMT https://community.hpe.com/t5/bladesystem-general/microsoft-cluster-supported-with-two-different-generation/m-p/6679342#M26832 Andrew_Haak 2014-11-29T22:29:13Z