topic enable USB port on a BL460c G7 in BladeSystem - General

enable USB port on a BL460c G7

Hany Amin — Wed, 26 Nov 2014 12:59:19 GMT

Hello All,

we have disabled the USB ports accidentally from bios, and after restarting, we couldn't access the setup menu to change this option, KVM is not responding until the OS lunches, even from the OA, or iLO it doesn't respond to any key board hits.

because the KVM is connected as a USB.

Any ideas how to fix that.

Regards,

Re: enable USB port on a BL460c G7

Jimmy Vance — Wed, 26 Nov 2014 23:22:27 GMT

The quickest way would be to pull the blade and flip switch 6 on to reset the BIOS back to factory defaults

Re: enable USB port on a BL460c G7

Hany Amin — Mon, 01 Dec 2014 22:25:14 GMT

Thanks Jimmy,,, I was afraid at the first because the server is booting from SAN and i wasn't sure if this reset will afect the booting but it worked. Thanks for your help.