topic Help needed C7000 Firmware Upgrade in BladeSystem - General

Help needed C7000 Firmware Upgrade

Eliyas — Mon, 02 Mar 2015 11:46:20 GMT

Hi All,

I am pretty new to HP C7000

We are planning for installing new HP BL460c Gen8 in our existing C7000 Enclosure, hence need your help ,guidance and expertise with the upgrade plan for existing Blades

Current Status:

Onboard Administrator Firmware Level 3.21 Nov 15 2010 [456204-B21]
HP 1/10Gb-F VC-Enet Module Bay1and2 Firmware Level 3.18 [447047-B21]
Blade status as below:

I need your kind guidance with below:

For Blades only ILO Upgrade will be enough or ROM FW upgrade will be also needed for Blades?
How should be the upgrade flow, what i have gathered until now suggests that do the Blades first, OA and finally VC.
Best Approach to do the Upgrade will SPP take care of the needed dependencies and Upgrade path ?
What should be the pre-upgrade tasks that you would suggest ?

Thanks in advance

Re: Help needed C7000 Firmware Upgrade

Torsten. — Mon, 02 Mar 2015 16:34:54 GMT

first see

http://h20564.www2.hp.com/hpsc/doc/public/display?docId=mmr_kc-0100204-12

about mixing!

Carefully read about minimum and maximum versions!!!

Your VC module can have version 3.61, no newer version is supported!

Re: Help needed C7000 Firmware Upgrade

Eliyas — Mon, 02 Mar 2015 16:54:53 GMT

Thanks Torsten :)

I did saw that Firmware Compatibility Matrix, so we shouldnt go beyond 3.61 for VC Module ? cos link suggests minimum 3.51 and Max 4.31

Could you please also help me with the Blades, will they need upgrade of ILO or BIOS ?
Would using SPP be the best way to update the OA and VC firmware or should i do manual update?

Thanks once again !!!

Regards,

Eliyas

Re: Help needed C7000 Firmware Upgrade

Torsten. — Mon, 02 Mar 2015 17:58:48 GMT

From release notes of VC firmware:

Beginning with VC 3.70, the HP 1/10Gb VC Enet Module (399593-B22) and the
HP 1/10Gb-F VC Enet Module (447047-B21) are no longer supported. Beginning with VC 4.10,
the HP 4Gb VC-FC Module (409513-B21) is no longer supported.

In general first update the blades drivers, BIOS, firmware and ILO, the virtual connect and OA firmware.

A new SPP should come out soon.