topic Raid configuration from iLO ? in BladeSystem - General

Raid configuration from iLO ?

nicolaspla — Tue, 22 Sep 2015 14:29:34 GMT

Hi,
I'm looking for the way to configure the RAID from the CLI, or from iLO or from OA, it's possible ?

I need to install about 48 blades, and configure all of it in RAID 0.

Thanks
Diego

Re: Raid configuration from iLO ?

TVVJ — Thu, 04 Feb 2021 21:43:59 GMT

Hello,

You may refer to section "Using the Command Line Interface" in the https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=c01978996 for instruction for CLI configuration.

Regards,

Vijayasarathy

Re: Raid configuration from iLO ?

nicolaspla — Tue, 29 Sep 2015 20:41:24 GMT

Hi, I installed ACU, but you can't administrate remotely others Blades.

The ACU only allow to configure the current Blade, where you have installed ACU.

Regards

Diego

Re: Raid configuration from iLO ?

Jimmy Vance — Thu, 04 Feb 2021 21:44:43 GMT

Dealing with many blades, you can use the HP scripting toolkit and PXE boot into an image that runs scripted tools to configure the iLO, RBSU settings and RAID. http://www.hp.com/go/toolkit