https://community.hpe.com/t5/bladesystem-general/bl660c/m-p/6822954#M27200 <P>Hi everyone,</P><P>I am using HP blade servers (HP Enclosure C7000). I have a Full Height Server(BL 660C), I am using Virtual Connect and i using&nbsp;two interconnect bays Bay1 and Bay2 for networking.(both going to trunk ports of the switch and i am using vmwares distributed switch)</P><P>When installing ESXi 5.5 should i just select just one network card and give the management IP and deselect other 3 network cards or all the four network cards should be connected.</P><P>Also i have half height BL 460 C Gen9 server please guide me experts</P><P>I am new to Hp and vmware so please guide me.</P> Sun, 10 Jan 2016 17:31:37 GMT risingflight143 2016-01-10T17:31:37Z https://community.hpe.com/t5/bladesystem-general/bl660c/m-p/6822954#M27200 <P>Hi everyone,</P><P>I am using HP blade servers (HP Enclosure C7000). I have a Full Height Server(BL 660C), I am using Virtual Connect and i using&nbsp;two interconnect bays Bay1 and Bay2 for networking.(both going to trunk ports of the switch and i am using vmwares distributed switch)</P><P>When installing ESXi 5.5 should i just select just one network card and give the management IP and deselect other 3 network cards or all the four network cards should be connected.</P><P>Also i have half height BL 460 C Gen9 server please guide me experts</P><P>I am new to Hp and vmware so please guide me.</P> Sun, 10 Jan 2016 17:31:37 GMT https://community.hpe.com/t5/bladesystem-general/bl660c/m-p/6822954#M27200 risingflight143 2016-01-10T17:31:37Z