LUns not getting visible on two VM simultaneously

lovenanda — Mon, 15 Jul 2013 00:39:48 GMT

Hi,

I have created two Vm from the host.when i was assigned the lun direct from the storage end on one vm guest working fine.but when i assigned the same way to another vm Lun its shows below errors.

EFI version 1.10 [14.62] Build flags: EFI64 Running on Intel(R) Itanium Processor EFI_DEBUG
EFI IA-64 SDV/FDK (BIOS CallBacks) [Tue Nov 1 13:13:08 2011] - HP
Cache Enabled. This image MainEntry is at address 0000000000102000
HP AVIO Stor Driver v1.0
HP AVIO LAN UNDI Driver v1.0
FPSWA.EFI preload successful.
FPSWA.EFI start successful.
VsdIssueIocbRequest: ComplQProducerIndex=0x0, ComplQConsumerIndex=0x0.
    vsd_iocb_hdr_t vch_iocb_hdr = {
      uint16_t iocb_index      = 0x0
      uint16_t next_iocb_index = 0xFFFF
      uint16_t num_iocbs       = 0x1
      uint16_t reserved        = (omitted)
      uint64_t guest_context   = 0x0
      uint32_t iocb_type       = 0x6
      uint32_t iocb_status     = 0x0
    }
}
VsdIssueIocbRequest: The IOCB has not been processed within 60 seconds.
VsdDiscoverDevice: VsdInquiryDevice() failed. PCI bus/dev=0x0/0x2, VSD LUN ID=0x0, Status=0x8000000000000007.
CDB: { 0x12, 0x0, 0x0, 0x0, 0x80, 0x0 }
IOCB status: 0x6, SCSI status: 0x0.
VsdDiscoverDevice: VsdInquiryDevice() failed. PCI bus/dev=0x0/0x2, VSD LUN ID=0x0, Status=0x8000000000000007.
CDB: { 0x12, 0x0, 0x0, 0x0, 0x80, 0x0 }
IOCB status: 0x6, SCSI status: 0x0.
VsdDiscoverDevice: VsdInquiryDevice() failed. PCI bus/dev=0x0/0x2, VSD LUN ID=0x0, Status=0x8000000000000007.
CDB: { 0x12, 0x0, 0x0, 0x0, 0x80, 0x0 }
IOCB status: 0x6, SCSI status: 0x0.
VsdDiscoverDevice: VsdInquiryDevice() failed. PCI bus/dev=0x0/0x2, VSD LUN ID=0x0, Status=0x8000000000000007.
CDB: { 0x12, 0x0, 0x0, 0x0, 0x80, 0x0 }
IOCB status: 0x6, SCSI status: 0x0.
VsdDiscoverDevice: VsdInquiryDevice() failed. PCI bus/dev=0x0/0x2, VSD LUN ID=0x0, Status=0x8000000000000007.
CDB: { 0x12, 0x0, 0x0, 0x0, 0x80, 0x0 }
IOCB status: 0x6, SCSI status: 0x0.
VsdDiscoverDevice: VsdInquiryDevice() failed. PCI bus/dev=0x0/0x2, VSD LUN ID=0x0, Status=0x8000000000000007.
CDB: { 0x12, 0x0, 0x0, 0x0, 0x80, 0x0 }
IOCB status: 0x6, SCSI status: 0x0.
READ command failed. PCI bus/dev=0x0/0x2, VSD LUN ID=0x4001000000000000, Status=0x8000000000000007,IOCB status=0x6, SCSI status=0x0.
READ command failed. PCI bus/dev=0x0/0x2, VSD LUN ID=0x4001000000000000, Status=0x8000000000000007,IOCB status=0x6, SCSI status=0x0.
READ command failed. PCI bus/dev=0x0/0x2, VSD LUN ID=0x4001000000000000, Status=0x8000000000000007,IOCB status=0x6, SCSI status=0x0.
READ command failed. PCI bus/dev=0x0/0x2, VSD LUN ID=0x4001000000000000, Status=0x8000000000000007,IOCB status=0x6, SCSI status=0x0.
EFI Boot Manager ver 1.10 [14.62] [Build: Tue Nov 1 13:13:08 2011]

Loading device drivers
EFI Boot Manager ver 1.10 [14.62] [Build: Tue Nov 1 13:13:08 2011]

Please select a boot option

    EFI Shell [Built-in]
    Boot option maintenance menu

    Use ^ and v to change option(s). Use Enter to select an option
Loading.: EFI Shell [Built-in]
EFI Shell version 1.10 [14.62]
Device mapping table
blk0 : Acpi(PNP0A03,0)/Pci(2|0)/Fibre(WWN50001FE1501049C8,Lun4001000000000000)
blk1 : Acpi(PNP0A03,0)/Pci(2|0)/Fibre(WWN50001FE1501049C9,Lun4001000000000000)
blk2 : Acpi(PNP0A03,0)/Pci(2|0)/Fibre(WWN50001FE1501049CA,Lun4001000000000000)
blk3 : Acpi(PNP0A03,0)/Pci(2|0)/Fibre(WWN50001FE1501049CB,Lun4001000000000000)

regards,

Shahzad

Re: LUns not getting visible on two VM simultaneously

Ing-Syst — Wed, 31 Jul 2013 19:24:15 GMT

What storage do you have with LUNs? What storage connection type do you use? What hosts do you present LUNs?

topic Re: LUns not getting visible on two VM simultaneously in BladeSystem - General

LUns not getting visible on two VM simultaneously

Re: LUns not getting visible on two VM simultaneously