FlexNIC-Partition

CAT-5 — Wed, 27 Nov 2013 12:02:15 GMT

Hello

We have blade c7000 with G8 servers and HP Flex 10 (FlexNIC /FlexHBA , 554FLB ) with

10 Gb port 1: Up to 3x Ethernet (FlexNics) + 1x Fibre Channel (over Ethernet) (FlexHBA)
10 Gb port 2: Up to 3x Ethernet (FlexNics) + 1x Fibre Channel (over Ethernet) (FlexHBA)

on blade server we have Win 2012 as hyper-v host. on Windows 2012 in network and sharing centre we can see six NIX cards as above configuration with each 2 GB configuration and HBA 4 GB configuraiton. Can we configure Flex 10 to have as below

10 Gb port 1: 1x Ethernet 6GB + 1x Fibre Channel 4GB
10 Gb port 2: 1x Ethernet 6GB + 1x Fibre Channel 4GB

And only two NIC interface appear on Win 2012 network and sharing center

Thanks

topic FlexNIC-Partition in BladeSystem - General

FlexNIC-Partition