How can I tell what version of Emulex firmware is on a G7 blade server's CNA LOM?

chuckk281 — Mon, 18 Jul 2011 16:08:08 GMT

Lawrence had LOM question:

*****************

How do I tell what the CNA LOM firmware is on a Blade server running VMware ESXi without having to reboot the server to look at the POST screen?

I tried the OA’s Firmware screen but the Emulex LOM firmware is not displayed even with the latest OA firmware 3.31.

Is there perhaps a Linux command line query that I can run from the server’s console?

******************

Chris answered:

**************

If your ESX host is being managed by vCenter, you can check the Hardware Status tab. There is a Software section that you can look at the installed driver and firmware version of the NICs. Or, you can log into the Unsupported Console (Alt-F1), type in “unsupported” then the root password. Use the “ethtool –i vmnic” command to view the same information. Ethtool is also available in ESX Classic.

*******************

Other comments or help for Lawrence? Have you tried this approach?

Re: How can I tell what version of Emulex firmware is on a G7 blade server's CNA LOM?

Psychonaut — Tue, 19 Jun 2012 14:26:34 GMT

Is there a way to see the firmware level from the OA CLI? Or somewhere else without logging into the server itself?

topic Re: How can I tell what version of Emulex firmware is on a G7 blade server's CNA LOM? in BladeSystem - General

How can I tell what version of Emulex firmware is on a G7 blade server's CNA LOM?

Re: How can I tell what version of Emulex firmware is on a G7 blade server's CNA LOM?