topic Re: BL460c Gen8 with 366m card using RH6.1 x64? in BladeSystem - General

BL460c Gen8 with 366m card using RH6.1 x64?

Jase4772 — Tue, 21 Aug 2012 16:17:50 GMT

Hi,

I can't get the 366m card to show on the Gen8 with RH 6.1 x64 and I've now installed the latest igb driver 3.4.7. Is there anything special that needs doing to get the card to appear?

Thanks

Jason

Re: BL460c Gen8 with 366m card using RH6.1 x64?

Jimmy Vance — Tue, 21 Aug 2012 17:33:58 GMT

This driver should support that card

http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5177950&spf_p.tpst=psiSwdMain&spf_p.prp_psiSwdMain=wsrp-navigationalState%3Dlang%253Den%257Ccc%253DUS%257CprodSeriesId%253D5177949%257CprodNameId%253D5177950%257CswEnvOID%253D4103%257CswLang%253D8%257CswItem%253DMTX-e42066736fc842b09bcaa9ead0%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

Re: BL460c Gen8 with 366m card using RH6.1 x64?

Jase4772 — Tue, 21 Aug 2012 17:59:54 GMT

Hi

I've tried that driver without success which then led me to give the 3.4.7 version a go.

Could there be something I need to check in the bios?

Thanks
Jase