topic 2 Network interface to the same interconnect bay in BladeSystem - General

2 Network interface to the same interconnect bay

MauricioLopez — Mon, 14 Mar 2011 21:10:11 GMT

Hi, guys.

c7000 enclosure

bl460c server with 2 embeded ethernet ports + HBA mezzanine + Ethernet mezzanine.

Ethernet Interconnects on Bay 1 and Bay 5 only.

Fiber Interconnect on bays 3 &4

Is it posible to map bl460c eth1 & eth2 to interconect on Bay 1? or do I really need an Ethernet Interconect on Bay2?

Best Regards

Re: 2 Network interface to the same interconnect bay

chuckk281 — Tue, 15 Mar 2011 21:06:19 GMT

The port mapping of the ports is defined for each of the blades for the 2 C-Class enclosures. In the c7000 enclosures port1 is mapped to Bay1 and Port2 is mapped to Bay2.

See this document on page 17 there are the port mappings:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00816246/c00816246.pdf