Windows Server 8 (Developers Release) Network Drivers

chuckk281 — Tue, 17 Apr 2012 14:54:56 GMT

A Windows Server 8 question from Kris:

*******************

I have a customer that has the Developers release of Windows 8 and is wanting to do some testing with it. The problem he has is that he cannot seem to find any network drivers and is unable to do the testing he would like without network connectivity. He is not looking for anything “official” with regards to the driver, just something that will get him connectivity. Does anyone have any ideas on where he might be able to obtain a “test” or “beta” driver? Thanks.

**************

Some input from Om:

******************

I had the same problem. I got it resolved by using drivers from Win2k8 R2 PSP. You will need to extract the PSP and then extract the smart component for your NIC and then point Windows to pick this driver during Plug-n-Play.

************

Some good info from David:

*********************

I’m sure everyone means to refer to Windows SERVER 8, and not the client OS. If you go to www.hp.com/go/microsoft --> Windows 8, it shows the on-media drivers for network included in the Developers Release:

On Media Drivers

Network:

Intel Network Controller Driver

NETE1G3E.SYS

Intel E1E Network Controller Driver

NETE1E3E.SYS

Broadcom 1 GB Network Controller Driver

B57ND60A.SYS

Broadcom 1GB Network Multi-Function Driver

BXND60A.SYS

Broadcom 1GB Network Multi-Function Virtual Bus Device Driver

BXVBDA.SYS

Broadcom 10 GbE Network Multifunction Driver

EVBDA.SYS

Mellanox 10 GbE Network Controller Driver

MLX4ETH63.SYS

Mellanox 10 GbE Network Controller Virtual Bus Device Driver

MLX4_BUS.SYS

QLOGIC iSCSI Controller Driver

QL40XX.SYS

To support the Windows Server 8 BETA, there is a whitepaper in process to detail how to use with ProLiant and what is/is not available for testing.

****************

Any other suggestions?

Re: Windows Server 8 (Developers Release) Network Drivers

chuckk281 — Tue, 17 Apr 2012 16:15:15 GMT

Additional input on this subject:

******************

From Vincent:

Hhmm, does that mean that Emulex 10GbE drivers are NOT in there ? That would be more than unfortunate given that it’s the default on G7 and Gen8 blades…

From Armand:

I’m running a Windows server 8 Beta Datacenter evaluation copy build 8250 on my BL460cG7, and the network is up and running:

NP NC553i Dual Port FlexFabric 10Gb CNA version 4.0.121.3219

topic Windows Server 8 (Developers Release) Network Drivers in BladeSystem - General

Windows Server 8 (Developers Release) Network Drivers

Re: Windows Server 8 (Developers Release) Network Drivers