https://community.hpe.com/t5/bladesystem-general/hp-firmware-iso-fails-to-boot-correctly-from-usb-stick-bl460c/m-p/2303082#M28813 <P>We have created a Firmware USB stick using the HP USB Key Utility and the 9.10 ISO image. We have added the latest BIOS / SmartArray FW scexe files in to \HP\swpackages as instructed on the HP webpage. When we boot the blade via iLO Virtual USB from a PC the boot fails at 34%. The USB stick works fine when plugged directly into a DL380G7 for example. Anyone got any ideas or experiences trying this out?</P><P>&nbsp;</P><P>Message:</P><P>&nbsp;</P><P>"Boot Failed: Please change disks and press a key to continue"</P> Fri, 01 Oct 2010 09:48:23 GMT Alisdair Philp 2010-10-01T09:48:23Z https://community.hpe.com/t5/bladesystem-general/hp-firmware-iso-fails-to-boot-correctly-from-usb-stick-bl460c/m-p/2303082#M28813 <P>We have created a Firmware USB stick using the HP USB Key Utility and the 9.10 ISO image. We have added the latest BIOS / SmartArray FW scexe files in to \HP\swpackages as instructed on the HP webpage. When we boot the blade via iLO Virtual USB from a PC the boot fails at 34%. The USB stick works fine when plugged directly into a DL380G7 for example. Anyone got any ideas or experiences trying this out?</P><P>&nbsp;</P><P>Message:</P><P>&nbsp;</P><P>"Boot Failed: Please change disks and press a key to continue"</P> Fri, 01 Oct 2010 09:48:23 GMT https://community.hpe.com/t5/bladesystem-general/hp-firmware-iso-fails-to-boot-correctly-from-usb-stick-bl460c/m-p/2303082#M28813 Alisdair Philp 2010-10-01T09:48:23Z