https://community.hpe.com/t5/bladesystem-general/not-configured-for-virtual-connect/m-p/7014484#M28996 <P>I got it solved , i did mistake with Double dense instead of single dense</P><P>&nbsp;</P> Thu, 09 Aug 2018 10:25:54 GMT Alhakimi 2018-08-09T10:25:54Z https://community.hpe.com/t5/bladesystem-general/not-configured-for-virtual-connect/m-p/7014483#M28995 <P>Hello Every one ,&nbsp;</P><P>I am having new bladesystem , C7000 , the Servers shows Not Configured for Virtual Connect, any Idea what could be the reason ? so i have already imported the Bladesystem into Virtual Connect Manager , but still showing this message , what wonders me also in Virtual Connect Manager under Hardware - Overview</P><P>I don''t see the Servers in Frontview i see only the Interconnect Bays and in device Bays no devices are listed&nbsp;</P><P>any idea what could be the reason , what i am missing</P><P>Regards</P><P><BR />Rashed</P><P>&nbsp;</P> Thu, 09 Aug 2018 10:13:53 GMT https://community.hpe.com/t5/bladesystem-general/not-configured-for-virtual-connect/m-p/7014483#M28995 Alhakimi 2018-08-09T10:13:53Z https://community.hpe.com/t5/bladesystem-general/not-configured-for-virtual-connect/m-p/7014484#M28996 <P>I got it solved , i did mistake with Double dense instead of single dense</P><P>&nbsp;</P> Thu, 09 Aug 2018 10:25:54 GMT https://community.hpe.com/t5/bladesystem-general/not-configured-for-virtual-connect/m-p/7014484#M28996 Alhakimi 2018-08-09T10:25:54Z