Networking scenario

Alhakimi — Thu, 23 Aug 2018 09:52:47 GMT

Dear friends,

i am having Blacesystem C7000 , it has 4 X 10 Gb Network cards , 2 in each Bay , so bay 1 x1 and Bay 2 x1 connected to the same Switch and Bay 1 x 2 and Bay 2 x2 connected to the other switch, i need to use 4 network what is the best scenario to use them without Vlan.

in Network Wizard should i use the option :

1) Connection with Uplink dedicated to Single Network or

2 ) connection with Uplink Carrying Multiple Ethernet networks and / or FCoE Network using Vlan Tagging

Note when i use the second option and i need to use the Vlans which i don't want.

when i use the first option , i get Network connectivity problem with Bay 1 and Bay 2 port number 2 , it goes directly offline and give error no Link.

any advise?

Thanks and B. regards

Rashed

Re: Networking scenario

frenchy94 — Thu, 23 Aug 2018 11:17:47 GMT

Hello

Which interconnect module do you use ?

---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
https://www.avast.com/antivirus

topic Re: Networking scenario in BladeSystem - General

Networking scenario

Re: Networking scenario