topic Re: First steps at Enclosure c3000 in BladeSystem - General

First steps at Enclosure c3000

Zoobik — Fri, 12 Jul 2019 07:43:15 GMT

Hello, everyone!

Not long ago we've bought c3000 BladeSystem with two BL460c Gen8 Servers on board and two 6125G/XG switches, also we want to buy 3 more BL460c Gen10.

Question is how to connect this farm to our SAN-fabric based on Brocade 300 switches (8 GB Fiber Channel)?

As I understand, after reading tonns of documentation and forums, we need Fiber-Channel Pass-Through module or Virual Connect Fiber Channel Module.

So, can you advice, what exactly modules for Enclosure c300 do I need? Do I need specified adapters for BL460c (at Gen8 we have HPE FlexFabric 10Gb 2-port 534FLB Adapter)? This project isn't cheap for our company and we don't have rights for mistake

Thanks for helping!

Re: First steps at Enclosure c3000

frenchy94 — Fri, 12 Jul 2019 09:56:14 GMT

First of all you need to have HBA on BL (mezzanine port)

Then install either San switch/or pasthru on slot 3 and 4 (rear) in C3000

---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
https://www.avast.com/antivirus

Re: First steps at Enclosure c3000

Zoobik — Fri, 12 Jul 2019 10:26:09 GMT

Hey, franchy94! Thanks for quick replying.

Is HPE Virtual Connect 8Gb 24-Port Fibre Channel Module for c-Class BladeSystem will help? Cuz I cann't find Pass-Tru 8 GB module.

Re: First steps at Enclosure c3000

frenchy94 — Fri, 12 Jul 2019 11:32:14 GMT

Yes fine,

---
L'absence de virus dans ce courrier électronique a été vérifiée par le logiciel antivirus Avast.
https://www.avast.com/antivirus

Re: First steps at Enclosure c3000

Zoobik — Fri, 12 Jul 2019 11:39:32 GMT

Thank you! It was very helpful.

Have a nice day!