https://community.hpe.com/t5/bladesystem-general/rdp-configure-array-configuration/m-p/4208889#M2941 Have you tried:<BR /><BR />Action = Reconfigure<BR /><BR />In the second script? Wed, 04 Jun 2008 18:37:00 GMT cmmiller 2008-06-04T18:37:00Z https://community.hpe.com/t5/bladesystem-general/rdp-configure-array-configuration/m-p/4208888#M2940 <!--!*#-->Hi,<BR />I have a SA-E200/E400 controller with 8 drives<BR />I want to configure 2 drives as RAID 1 and the rest of the drives as RAID5.<BR /><BR />First I create the RAID1<BR />Action = Configure<BR />Method = Custom<BR />Controller = All<BR /><BR />; Array Specifications<BR />Array = A<BR />Drive = 1I:1:1,1I:1:2<BR />LogicalDrive = 1<BR />RAID = 1<BR /><BR /><BR />Second I install Windows 2003<BR /><BR /><BR />Third I config the rest of the disks. On that point it deletes all previus created logical drives!!! What am I missing ???<BR /><BR />Action = Configure<BR />Method = Custom<BR />Controller = All<BR /><BR /><BR />; Array Specifications<BR />Array = B<BR />Drive = 1I:1:3,1I:1:4,2I:1:5,2I:1:6,2I:1:7,2I:1:8<BR />LogicalDrive = 1<BR />RAID = 5 Mon, 02 Jun 2008 12:45:40 GMT https://community.hpe.com/t5/bladesystem-general/rdp-configure-array-configuration/m-p/4208888#M2940 Ole Ærbo_2 2008-06-02T12:45:40Z https://community.hpe.com/t5/bladesystem-general/rdp-configure-array-configuration/m-p/4208889#M2941 Have you tried:<BR /><BR />Action = Reconfigure<BR /><BR />In the second script? Wed, 04 Jun 2008 18:37:00 GMT https://community.hpe.com/t5/bladesystem-general/rdp-configure-array-configuration/m-p/4208889#M2941 cmmiller 2008-06-04T18:37:00Z