topic Re: Clearing the Virtual Connect system log? in BladeSystem - General

Clearing the Virtual Connect system log?

jzaitseff — Mon, 26 Aug 2013 00:59:30 GMT

I look after a number of HP BladeSystem C7000 enclosures, each having two HP VC Flex-10 Enet modules in bays 1 and 2. The VC Flex-10 modules are running the latest firmware, v4.01.

The question I have is: how do I clear the system log stored in the VC modules? Is this possible without resetting to factory defaults? I have, of course, looked through the VC documents for this, as well as looking at the GUI/Web interface, the SSH command line interface and the VCSU tool, all to no avail. Any help appreciated!

Re: Clearing the Virtual Connect system log?

marcelkoedijk — Wed, 25 Sep 2013 09:34:47 GMT

you cant delete the VC logfiles

Re: Clearing the Virtual Connect system log?

Kezzz — Thu, 31 Jan 2019 23:15:33 GMT

I would SOOOOOO love if someone could show me how to clear the VC System Logs. There has just GOT TO BE A WAY to clear it. Anyone?

Re: Clearing the Virtual Connect system log?

tilt — Fri, 24 Sep 2021 12:10:04 GMT

I was going to try to install a different firmware to clear the logs but i doubt that will work.