https://community.hpe.com/t5/bladesystem-general/vcm-webinterface-does-not-work-correclty/m-p/6828593#M29856 <P>I&nbsp;have three c7000 with redudant vc modules and on one I have the following&nbsp;problem (the two others work fine and are same version etc.):</P><P>&nbsp;</P><P>Problem:</P><P>- VCM Webinterface&nbsp;uses only 1/2 of screen (the upper half) and hangs on "loading" in Backup Menu</P><P>&nbsp;</P><P>Solutions tried without luck so far:</P><P>- serveral Browsers (IE, Chrome, Firefox) &gt; don't think it is an issue here since the other work</P><P>- reset VMC, with and without failover (both modules show the same behaviour)</P><P>- update from 4.30 to 4.45</P><P>&nbsp;</P><P>After some time the webserver restarts automaticly on those modules but the problem stays.</P><P>Any ideas what to do besides contacting HPE support?</P><P>&nbsp;</P><P>Many thanks in advance.!</P> Sat, 30 Jan 2016 15:10:47 GMT StefanMineral 2016-01-30T15:10:47Z https://community.hpe.com/t5/bladesystem-general/vcm-webinterface-does-not-work-correclty/m-p/6828593#M29856 <P>I&nbsp;have three c7000 with redudant vc modules and on one I have the following&nbsp;problem (the two others work fine and are same version etc.):</P><P>&nbsp;</P><P>Problem:</P><P>- VCM Webinterface&nbsp;uses only 1/2 of screen (the upper half) and hangs on "loading" in Backup Menu</P><P>&nbsp;</P><P>Solutions tried without luck so far:</P><P>- serveral Browsers (IE, Chrome, Firefox) &gt; don't think it is an issue here since the other work</P><P>- reset VMC, with and without failover (both modules show the same behaviour)</P><P>- update from 4.30 to 4.45</P><P>&nbsp;</P><P>After some time the webserver restarts automaticly on those modules but the problem stays.</P><P>Any ideas what to do besides contacting HPE support?</P><P>&nbsp;</P><P>Many thanks in advance.!</P> Sat, 30 Jan 2016 15:10:47 GMT https://community.hpe.com/t5/bladesystem-general/vcm-webinterface-does-not-work-correclty/m-p/6828593#M29856 StefanMineral 2016-01-30T15:10:47Z