https://community.hpe.com/t5/bladesystem-general/move-vcm-roll/m-p/6866016#M29949 <P>Is there anyway to move the VCM roll from one interconnect&nbsp;to another.</P><P>Thanks in advance for your help!</P> Sat, 04 Jun 2016 02:26:46 GMT cursur949 2016-06-04T02:26:46Z https://community.hpe.com/t5/bladesystem-general/move-vcm-roll/m-p/6866016#M29949 <P>Is there anyway to move the VCM roll from one interconnect&nbsp;to another.</P><P>Thanks in advance for your help!</P> Sat, 04 Jun 2016 02:26:46 GMT https://community.hpe.com/t5/bladesystem-general/move-vcm-roll/m-p/6866016#M29949 cursur949 2016-06-04T02:26:46Z https://community.hpe.com/t5/bladesystem-general/move-vcm-roll/m-p/6866940#M29950 <P>Do you mean you wish to move the running instance of Virtual Connect Manager from its existing VC module to another? &nbsp;You can do this by selecting "Reset Virtual Connect Manager" and selecting "Force Failover". &nbsp; From the VCM CLI run "reset vcm -failover".</P> Tue, 07 Jun 2016 18:51:49 GMT https://community.hpe.com/t5/bladesystem-general/move-vcm-roll/m-p/6866940#M29950 Robert_Jewell 2016-06-07T18:51:49Z