HP Virtual Connect Manager Ethernet network problem, one nic connection unable to ping gateway.

Jazz7 — Mon, 13 Jun 2016 06:33:47 GMT

Hi All

I encounter problem when I configure hp c7000 enclosure virtual connect manager.

I have 3 network connection as below

MGMT = interconnect Bay 1 x5 / Bay 2 x5
All_Prod= interconnect Bay 1 x6 / Bay 2 x6
DMZ= interconnect Bay 1 x7 / Bay 2 x7

Blade Proliant BL660c install with VMware vsphere as VMware host.

Server profile

LOM1:1a MGMT
LOM1:2a MGMT
LOM1:1c All_Prod
LOM1:2C All_Prod
LOM1:1d DMZ
LOM1:2d DMZ

I have a VM client server with window Server 2012 with 2 Nic. Below are my problem.

Nic 1 = VLAN01 (All_Prod)

Failed to ping gateway

Nic 2 = VLAN10 (DMZ)

Able to ping gateway successful

If I use my own notebook plug into the physical switch port and hardcode my notebook tcp/ip setting to DMZ IP address, I am able to ping default gateway.

Can anyone advise what went wrong on my configuration.

Thank you

Jazz

Re: HP Virtual Connect Manager Ethernet network problem, one nic connection unable to ping gateway.

Adrian Clint — Thu, 07 Jul 2016 11:29:39 GMT

Is All_Prod multiple VLANs?

Have you setup VLAN tagging correctly on the blade?

topic Re: HP Virtual Connect Manager Ethernet network problem, one nic connection unable to ping gateway. in BladeSystem - General

HP Virtual Connect Manager Ethernet network problem, one nic connection unable to ping gateway.

Re: HP Virtual Connect Manager Ethernet network problem, one nic connection unable to ping gateway.