https://community.hpe.com/t5/bladesystem-general/active-active-configuration/m-p/6903989#M30008 <P>Hi Everyone,</P><P>One of our site we are using flex-10/10D virtual connect module having the firmware of 4.40. Six blades 460 Gen 9 and using Flex fabric 20Gb 2 port 650 FLB adapter. Is there any possibility to configure redundancy at VC level with Active/Active scenario. We don't want any sort of teaming or bonding at OS level. Several time we tried to configure redundancy at VC level in between Bay 1 and Bay 2 ports but always getting Active/SBY configuration.</P><P>&nbsp;</P> Mon, 03 Oct 2016 02:43:23 GMT KhalidRasool 2016-10-03T02:43:23Z https://community.hpe.com/t5/bladesystem-general/active-active-configuration/m-p/6903989#M30008 <P>Hi Everyone,</P><P>One of our site we are using flex-10/10D virtual connect module having the firmware of 4.40. Six blades 460 Gen 9 and using Flex fabric 20Gb 2 port 650 FLB adapter. Is there any possibility to configure redundancy at VC level with Active/Active scenario. We don't want any sort of teaming or bonding at OS level. Several time we tried to configure redundancy at VC level in between Bay 1 and Bay 2 ports but always getting Active/SBY configuration.</P><P>&nbsp;</P> Mon, 03 Oct 2016 02:43:23 GMT https://community.hpe.com/t5/bladesystem-general/active-active-configuration/m-p/6903989#M30008 KhalidRasool 2016-10-03T02:43:23Z